Cat et 2015A software and keygen working 100%
1.It is the latest generation of the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.
2.This is the only recommended communication device for CAT, and the only datalink device that will allow you to properly communicate with a CAT engine on dual data links.
3.This function is needed for some CAT ET (Electronic Technician) functions.
4. Latest version is 2015A with Bluetooth.
5.Designed to run with Microsoft Windows XP or windows7 32bits
6. We’d like to recommend you to select it with second hand dell d630 laptop, we will install the software before ship, so you can get it work directly after you receive it.
CAT III Diagnostic Tool Communication:
Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;
Flash program allows adapter firmware upgrades as additional features become available;
Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times;
Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).
Ready to use, if you select it without the laptop, just install software program onto PC !
we can help for cat et installation working 100%
The service tool works with a communication adapter to allow connection to an ECM. A graphical interface makes this software quick to learn and easy to use. A separate pull-down menu for each function enhances the a??ease of use.a?? The version and identification of the ECM is automatically retrieved and is displayed on a summary screen when the program is started.
Diagnostic tests and calibrations can also be performed.
Caterpillar PC-based tools enable service technicians to reprogram ECMs, reconfigure control system parameters, fine tune performance or diagnose the root cause of a failure the first time. These powerful tools allow service personnel to display and analyze vital performance and health information from any system quickly and accurately. The service tool communicates with any system using ATA (J1708), J1939 or the Caterpillar proprietary data link networks. The service tools provide information and features needed to help a technician diagnose problems and perform repairs and to customize and personalize the operation of a product. By allowing customers to design flexibility and configurability into a product, Caterpillar service tools stretch beyond the capabilities of preprogrammed ECMs or onboard display systems.
CAT III Scan Tool Features:
Display graph and log status parameters.
Retrieve prognostic data including histograms, engine totals for fuel used and miles traveled.
View active diagnostics and clear logged diagnostics. View events where irregularities have occurred and have been logged by the ECM.
Perform calibrations to enhance performance of the ECM.
Customize the ECM with application-specific settings.
Over 100 custom Diagnostic, Information and Service features including:
2D and 3D Histogram plotting capability (engine software support required).
Custom Status screen groups
Snapshots (Download and display snapshot data recorded by the ECM)
Configuration Aid that allows upload/download of same configuration to multiple control modules
Customised Service Tool Options
Customized service tool name
Customized graphics for the splash screen and icons
Aftermarket differentiation, the tool for one customer does not work on the product of another customer.
Licensing options for customer management
Flash programming of the ECM(s)
Training demonstration allows familiarity with the toola s primary functions without connecting to ECM(s)
Major operating systems support (Microsoft Windows 95, 98, NT 4.0, 2000, ME, & XP)
Perform customized diagnostic tests to identify harness problems, cylinder or component failures (Automatic Cylinder Cutout with cylinder to cylinder fueling comparison)